Been busy this week. I’ve got about 12 hours invested in the car. (6 with Kevin, 6 on my own). On my own time through out the week, I started stripping the foot wells, center tunnel, and dash board. Id say I’m about 75% of the way done. Hard stuff is done. Should only take another 1-2 hours to finish up. Kevin spent most of today with me laying out the wiring. We have so far ran both headlamps, front turn signals and parking lams. We have also ran a few lines back to the battery area in the back. Finished up by covering all wires in either 1/2″ or 3/4″ plastic tubing. Once done, this will look stock. Well.. Not 1974 Stock, but 2005 :-). We are now looking into fabricating a bracket to hold the fuse panel, and relays.  Next up, is to finish the wiring up front. Need to mount the ground panel, and also fabricate and install the fuse panel holder so we can cut the existing wires to length. Then onto the tail lights, and engine wiring. Amazing how quickly some stuff comes together when you are equipped with time and tools to build what you want.  Pictures from the week are HERE.